Woodwork Repair Tips
Instructional Videos Below
Basic Woodwork Repair Tips for DIY Homeowners
House repair and maintenance is a common problem faced by all homeowners and being able to tackle the basic ones related to woodworking can save you a ton of cashola in the long run. Home repairs are an ongoing regiment to keeping home sweet home in tip top shape.
Here are 4 common problems you can do yourself
Woodwork Repair Tip #1: The Writing on the Wall
Scratches and other noticeable flaws on your walls are always a great eyesore. Unfortunately, it’s something that most people with children tolerate until their children are old enough to know better.
Small and slight scratches can be easily repaired with a bit of sanding and some touch up paint. If large scratches occur on paneled walls, your biggest problem would be finding a perfect match for your wall’s colors after removing the scratches. One possible solution to this problem is applying filler wax that has the closest shade to your walls color.
Woodwork Repair Tip #2: Repairing A Hole In Sheetrock
Smaller holes, such as nail/screw holes (up to the size of a dime) and cracks in sheetrock can be patched using lightweight Spackling Compound found in all hardware and home repair stores. Just lightly sand after it dries and touch up with paint..
Woodwork Repair Tip #3: Hole in the Wood Wall
If your wall, or any woodwork object for that matter, has the mishap of small holes there are several things you can do to address this problem. If it’s only suffering from small holes, you can fill it up with putty. After the wood putty dries then simply sand the surfaceof excess putty and apply the appropriate wood finish and seal if necessary.
Big holes on the other hand can also use putty or other filling substances. When relying on filling alone, your biggest problem is finding one that could match your woodwork’s original shade. If however you prefer to glue a new piece of wood to cover the hole, make sure that you get rid of any excess substance from all sides and end the process by applying finishing once more.
Woodwork Repair Tip #4: Repairing Trim and Molding
If you have a piece of trim or molding that gets damaged it can be an easy repair if you follow the right steps. First you will need to use a utility knife to cut through any paint seal between the trim and the wall. Next, Slip a putty knife or scraper in behind the trim and pry it gently away from the wall. Be careful not to bend the tool. Next, fit the hooked end of a flat prybar into the separation behind the putty knife and press against a flat wood block that has been placed against the wall so not to damage your walls. When you remove the trim, don't knock out the nails from the backside as they can break away the face of the moldings. The best method is to use pliers to pull them all the way through from the back. Replace with new trim, using a fine-toothed saw, backsaw, or miter box to make the necessary cuts and paint or stain to match.
Current Tool Deals At Amazon.com
Repairing a Wood Chair from Expert Village
Do It Yourself woodwork repair doesn’t only help you save money and time but also represents a significant contribution in your part in ensuring that your home continues to be safe and comfortable for everyone. Plus the pride of sitting back and being able to say "I did it myself" is PRICELESS.
| Woodworking Tips Blog Updated : SHOPNOTES: Read the Grain Jointers work great to straighten an edge and flatten the face of a workpiece. But getting rough surfaces and chip out can be frustrating. Thankfully, the solution is pretty simple. Continue reading: "SHOPNOTES: Read the Grain". SHOPNOTES: Custom-Fit Dadoes Since plywood rarely measures its stated thickness, cutting dadoes to fit a plywood panel can be a frustrating trial and error process. But I've been using a no-measure technique that gives me a perfect fit every time. Continue reading: "SHOPNOTES: Custom-Fit Dadoes". SHOPNOTES: Shop-Made Pull One easy way to customize the look of a project is to make your own door and drawer pulls. And it's a great use for some special pieces of scrap wood. To make one yourself, take a look at this simple technique. Continue reading: "SHOPNOTES: Shop-Made Pull". SHOPNOTES: The Perfect Push Block A good push block keeps your hands safe while ripping and gives you firm control of a workpiece. When it comes to ripping small pieces, I've found the perfect push block - and it doesn't cost a penny. Continue reading: "SHOPNOTES:The Perfect Push Block". SHOPNOTES: Table Saw Cover I use the top of my table saw as an extra worksurface in my small shop. But I want to protect the top from glue drips or finish spills. So I came up with a simple add-on. Continue reading: "SHOPNOTES: Table Saw Cover". More Web Site Traffic |
